Attaching the Stem to the Base
English
Español
English
Español
Description
Product: Ocean Master Max Cantilever
Tutorial: Attaching the Stem to the Base
Tools Needed: None
Video Transcript
- The stem cam lock head comes with factory settings that can be adjusted by removing the two bolts on the sides using a 3/16th Allen Key.
- There is also a leveling bubble that comes preset from the factory.
- The bottom of the stem comes with four (4) leveling bolts that should be flush with the bottom of the base.
note… When installing on an uneven surface, screw the bolts until you see the leveling bubble at its median point.
- Use the 4 bolts supplied to fasten down the stem to the frame.
- Use the bottom hub to push the umbrella open completely.
- Once opened, insert the security pin through the mast.
